High Quality 100 Cotton Woven Fusible Interlining
Introduction of 100% cotton woven fusible shirt interlining /collar
interfacing
Width: 112cm
Elasticity index: no elasticity, micro-elastic, super-elastic
Feel: S feel (soft), M feel (moderate), H feel (hard)
Features: high anti-peel strength, It remains good performance
while water washing or dry cleaning, Glue won't break away from
basic fabric, no blistering when iron-on. Fabrics have wide
adaptability,which meets environmental protection requirements, and
the interlining are definite non-toxic and harmless to humans;
Uses: high-end casual shirts series, shoes and hats, etc., mainly
used in collars, sleeves cuff ;
Specifacation of shirt interlining /collar interfacing
| 1.Item: | C8505S |
| 2.Composition: | cotton/TC |
| 3.Weight/Gsm: | 75gsm-250gsm |
| 4.Color: | White/Natural/Black |
| 5.Width: | 40'', 44'', 48'', 60'' (1 Inch=2.54CM) |
| 6.Usage: | High quality suits, uniform |
| 7.Coating: | HDPE glue |
| 8.Washing conditions: | Dry cleaning,Water washing |
| 9. Fusing conditions: | 1)Temperature:130-145C |
| 2)Pressure: 2-3 bar |
| 3)Time: 10-15 s |
Transportation & Loading port
- By sea/air/express
- Shanghai/Ningbo/Tianjin
Quality Control
- ProductExternal QC : For each order, except for our factory quality
control , Our QC will check the production, according to the order
qty , our QC will choose some proportion of goods to inspect,
including width,weight,handfeeling,color,packing etc.
- Product Internal QC : Our factory will do the test with the
shipping samples of each order,including bond strength , washing
and dry cleaning , shrinkage etc., to make sure the quality can
reach the industrial Standard.
Basic Service
- Free charge of samples with technical data sheets
- Development new products as customer need
- Sourcing new products for customer
- Free charge of testing with customer's fabric and test report are
available
- Picking customers up from airport to hotel,office,factory come and
back
Note
A perfect working fusing press and appropriate conditions are
needed to achieve good results. Only an exact balanced combination
of temperature, pressure and time can guarantee and excellent
adhesion. Therefore the temperature, pressure and dwell time should
be often checked periodically every day and well documented.
The whole scale of fabrics should be tested before starting the
production. Not just for fusing, but also for steam pressing,
ironing, etc. Start production only after this checking. Big
differences may influence the results. Before using a specific type
of interlining for bulk production always refer to test report
containing analysis and recommended settings for using the
material.
